Cp-electronics MWS5 + slim line PSU Manual de usuario descargar pdf

page

1. Description and Operation

Section Contents Page

1 Description and operation 1

2 Dimensions 2

3 Wiring 5

4 Setup 6

5 Programming 9

6 Detection pattern diagrams 11

7 Fault finding 11

8 Specification 12

9 Part numbers 12

The MWS5 series of miniature microwave presence detectors provide automatic control of lighting loads

with optional manual control. The unit comes complete with a selection of fixing clips, allowing unobtrusive

flush mounting of the sensor head into ceiling tiles or on to solid surfaces. It has been designed so that it

can be used for ceiling mounted or wall mounted applications. As microwave radiation penetrates plastic

and glass, this unit has been specifically designed to be mounted inside a luminaire.

Three models are available: non-dimming MWS5, direct dim –DD and analogue dim –AD, all of which will

switch incandescent, fluorescent and compact fluorescent lighting. The direct dim (DD) variant controls

DSI or DALI digital dimming ballasts whilst the analogue dim (AD) variant controls 1-10V analogue

dimming ballasts.

The unit detects movement using a microwave sensor and turns the load on. When an area is no longer

occupied the load will switch off after an adjustable time out period has elapsed.

*for lux, time and sensitivity

Feature

MWS5

(Non-dimming)

MWS5-DD

Direct Dim

MWS5-AD

Analogue Dim

Up to 8m microwave sensing

  

3 mounting options

  

Lux sensor

  

Absence detection

  

Presence detection

  

Infrared remote setting

  

Infrared user handset

  

Push button adjustment*

  

Relay output

  

Dimming output

 

Contents

Miniature Microwave Presence Detector + Slim-Line Power supply

Product Guide

MWS5

1 2 3 4 5 6 ... 11 12

Indice de contenidos

Pagina 1 - Product Guide

page 1. Description and Operation Section Contents Page 1 Description and operation 1 2 Dimensions 2 3 Wiring 5 4 Setup 6 5 Programmin

Pagina 2

page 10 4 Dimming Channel 2 functions -DD & -AD only (factory default in brackets): 4.1 Light level Maintained illuminance level (adjustable

Pagina 3

page 11 6. Detection Patterns 7. Fault Finding LOAD DOES NOT COME ON Check to see if the live supply to the circuit is good. Strap across the L an

Pagina 4

page 12 LOAD 2 Amps fluorescent and incandescent lighting. 2 Amps compact fluorescent lighting. 2 Amps low energy lighting. 2 Amps low voltage lighti

Pagina 5 - 3. Wiring

page 2 2. Dimensions & Mounting options The product range consists of the following items that are ordered separately:- Power supply unit Sensor

Pagina 6 - 4. Setup

page 3 Flush mounting the sensor head using the flush mount bracket The product can be mounted into a flat panel of a luminaire using the flush moun

Pagina 7 - 4. Setup cont

page 4 2. Dimensions & Mounting options cont. Flush fitting the sensor head behind a diffuser using the flange bracket Flush fitting the sensor

Pagina 8

page 5 3. Wiring Wire the products as shown in the diagrams.

Pagina 9 - 5. Programming

page 6 1. Connect the power supply via the terminal block on the power supply unit as shown overleaf. Live supply to the L terminal, Neutral to the

Pagina 10 - 5. Programming (continued)

page 7 Settings adjustment:- On initial power up, the factory set default settings are:- Time = 20 minutes. Lux = Maximum (i.e. lights will switch o

Pagina 11 - 7. Fault Finding

page 8 Push button adjustment Time, Lux and Sensitivity Press and hold either button for at least 5 seconds then release: one of the LED‘s positione

Pagina 12 - 8. Specification

page 9 5. Programming All the following functions can be programmed using the remote control DD-LCDHS handset: 1. Detector Parameters (factory d

Comentarios a estos manuales

Sin comentarios

Cp-electronics MWS5 + slim line PSU Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Cp-electronics MWS5 + slim line PSU. CP Electronics MWS5 + slim line PSU User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Cp-electronics MWS5 + slim line PSU